# Equipment capacities and sources

> Last researched: **2026-11-21**. Values are planning defaults, not a carrier
> quotation. Cargo payload depends on the specific unit's tare, the route's
> legal gross-weight limit, the operator and the stowage. Always confirm with
> the carrier or haulier.

The application reads `config/equipment.yaml`; the numbers below are the values
that ship in that file. All payloads are **cargo-only** (already exclude the
tare), in kilograms. All volumes are **usable internal** cubic metres. Internal
dimensions are used only for a coarse "can one piece enter the unit" check, not
for 3D stowage or pallet layout.

## Shipped defaults

| Code | Equipment | Category | Payload (kg) | Volume (m³) | Internal L × W × H (cm) | Auto-selected? |
|---|---|---|---:|---:|---|---|
| `20GP` | Container 20ft (GP) | sea | 28,000 | 33 | 589 × 235 × 239 | yes |
| `40GP` | Container 40ft (GP) | sea | 28,000 | 68 | 1,203 × 235 × 239 | yes |
| `40HC` | Container 40ft High Cube | sea | 28,000 | 76 | 1,203 × 235 × 269 | yes |
| `45HC` | Container 45ft High Cube | sea | 27,700 | 86 | 1,356 × 235 × 269 | yes |
| `20RF` | Reefer 20ft | sea | 27,400 | 28.2 | 545 × 228 × 226 | no (specialist) |
| `40RF` | Reefer 40ft | sea | 29,240 | 67.5 | 1,159 × 228 × 254 | no (specialist) |
| `RIGID75` | Rigid truck 7.5t | road | 3,000 | 35 | 600 × 240 × 240 | yes |
| `TRL136` | Trailer 13.6m (standard) | road | 25,000 | 88 | 1,360 × 245 × 264 | yes |
| `MEGA` | Mega/XXL trailer 13.6m | road | 27,000 | 100 | 1,360 × 245 × 300 | yes |
| `TRL135` | Long-haul trailer 135 m³ | road | 28,500 | 135 | 1,565 × 245 × 352 | yes |

The 40ft GP values are exactly **28,000 kg / 68 m³**, the values named in the
brief's acceptance criteria. They are rounded planning values inside the
carrier ranges below.

## What the research found

### Sea containers

| Equipment | Published payload range | Published internal volume | Sources |
|---|---|---|---|
| 20ft GP | 28,250–28,380 kg | 33.2 m³ | [FreightUtils 20ft](https://www.freightutils.com/containers/20ft-standard), [PIL](https://pilship.online/shipping-solutions/cargo-solutions/), [MOL Logistics](https://mol-logistics.eu/de/container-dimensions/) |
| 40ft GP | 26,730–28,800 kg | 67.7–67.8 m³ | [FreightUtils 40ft](https://www.freightutils.com/containers/40ft-standard), [PIL](https://pilship.online/shipping-solutions/cargo-solutions/), [Mariana Express](https://www.mellship.com/shipping-solutions/cargo-solutions/?tab=dry-cargo) |
| 40ft HC | 26,540–28,800 kg | 76.0–76.4 m³ | [FreightUtils 40HC](https://www.freightutils.com/containers/40ft-high-cube), [OOCL](https://www.oocl.com/eng/ourservices/containers/containerspecifications/Pages/highcube.aspx), [Maersk dry cargo flyer](https://beta.maersk.com/~/media_sc9/maersk/local-information/files/europe/greece/export/equipment-flyer.pdf) |
| 45ft HC | 25,600–27,860 kg | 86.0 m³ | [OOCL](https://www.oocl.com/eng/ourservices/containers/containerspecifications/Pages/highcube.aspx), [DSV](https://www.dsv.com/en-za/our-solutions/modes-of-transport/sea-freight/shipping-container-dimensions/high-cube-dry-container), [SEACO](https://seacoglobal.co.za/equipment/dry-freight-containers/high-cube-dry-freight/45ft-high-cube-dry-freight-container/) |
| 20ft reefer | 27,400–27,700 kg | 27.0–28.3 m³ | [FreightUtils 20RF](https://www.freightutils.com/containers/20ft-reefer), [SeaCube](https://seacubecontainers.com/product_specs/20-foot-reefer/), [Maersk reefer specifications](https://beta.maersk.com.cn/~/media_sc9/maersk/local-information/files/africa/south-africa/important-information/container-type-and-sizes/reefer-equipment-specifications-updated.pdf) |
| 40ft reefer | 27,700–29,240 kg | 59.3–67.5 m³ | [FreightUtils 40RF](https://www.freightutils.com/containers/40ft-reefer), [DSV reefer](https://www.dsv.com/en-ae/our-solutions/modes-of-transport/sea-freight/shipping-container-dimensions/reefer-container), [Rohlig](https://www.rohlig.co.za/resource-centre/documents/reefer-containers) |

Notes:

* 20ft and 40ft GP are dimensionally 8'6" high; 40HC/45HC are 9'6".
* A 45ft HC has more cubic volume but a **lower payload** than a 40ft because
  its maximum gross mass is spread over a longer, heavier unit; 25.6–27.9 t is
  the range we found. 27,700 kg is used as the default.
* Reefers lose volume to insulation and the machinery box. For a 40ft reefer,
  published usable volumes differ materially (59.3 m³ in some operator tables,
  67.5 m³ in others; 67.5 m³ is normally the high-cube reefer figure). The
  catalog uses the higher published value and documents the variance. Override
  it if your carrier's equipment is the 59 m³ version.
* The 20ft reefer default volume of 28.2 m³ comes from an internal box of
  545 × 228 × 226 cm.

### Road vehicles

| Vehicle | Payload range | Usable volume | Sources |
|---|---|---|---|
| Rigid 7.5 t | 3,000–3,200 kg | ~33–35 m³ | [Honexpres 7.5t](https://www.honexpres.ro/en/resources/vehicles/camion-7-5t), [FreightPod](https://www.freightpod.co.uk/services/transport/) |
| Standard 13.6 m semi-trailer | 24,000–25,958 kg planning | 88–90 m³ | [DHL payload calculation (PDF)](https://www.dhl.com/content/dam/dhl/local/no/dhl-freight/documents/pdf/no-freight-payload-calculation-en.pdf), [LoadOptima truck capacity](https://loadoptima.com/en/blog/how-many-tonnes-cubic-metres-truck-capacity) |
| Mega/XXL 13.6 m | same gross limit, ~27 t here | ~100 m³ | [LoadOptima mega vs jumbo](https://loadoptima.com/en/blog/mega-vs-jumbo-vs-standard-trailer-difference), [Kögel Mega](https://www.koegel.com/en/product-overview/product-family-tarpaulin-vehicles/product-detail-mega/) |
| Long-haul 135 m³ | 28,500 kg (configured) | 135 m³ | [LoadOptima](https://loadoptima.com/en/blog/mega-vs-jumbo-vs-standard-trailer-difference), [Mainfreight fleet](https://www.mainfreight.com/en-nl/info-point/transport/fleet-specifications) |

Notes:

* A standard European articulated lorry is limited to 40 t gross; with a basic
  tractor and curtainsider tare the payload is around 24–26 t. The catalog uses
  25,000 kg and 88 m³ from DHL's planning sheet. Other operators quote ~90 m³
  for a 1360 × 245 × 270 cm box.
* A mega trailer gains internal height (about 3.00 m) and therefore volume
  (~100 m³); it does **not** gain payload. The catalog uses 27,000 kg as a
  rounded planning value.
* **135 m³ caveat:** 135 m³ is not a standard single EU trailer (a 13.6 m mega
  is about 100 m³; a jumbo step-frame is around 96–120 m³). It represents a
  high-volume long combination / double-deck configuration. The brief supplied
  a 135 m³ truck and a "285000 kg" payload; the latter is treated as a typo and
  replaced by an editable 28,500 kg default, per the brief's instruction. Treat
  this preset as a planning placeholder and confirm the actual vehicle and
  legal payload with the haulier. Use `TRL136` or `MEGA` for conventional EU
  road planning.
* Road axle limits, bridge formulae and national gross-weight rules are **not**
  modelled. A total weight under the payload line can still be illegal because
  of axle load or a local gross limit. This is a planning tool, not a compliance
  tool.

## Why the defaults are rounded

Carrier specifications repeat the same ISO envelope but differ in tare, door
openings, max gross mass and the deck/reefer equipment fitted. For example,
published 40ft GP payloads in the sources above range from 26,730 kg to about
28,800 kg. The app needs one planning number per type, so it uses widely cited
round values and makes them editable. The 40ft GP 28,000 kg / 68 m³ defaults are
also the values the brief's acceptance criteria use.

The catalog does not add a safety margin. If you need one, lower the payload or
volume in `config/equipment.yaml` (for example 95% of the carrier figure).

## How to change capacities

1. Edit `config/equipment.yaml`. Values are strings so they parse as `Decimal`
   without binary-float drift.
2. Keep `payload_kg` and `volume_cbm` positive, and internal dimensions
   positive. Set `enabled: false` to hide a type.
3. Set `auto_select: false` for specialist equipment that Auto mode should not
   choose (reefers ship this way).
4. Restart the app, or point `EQUIPMENT_CONFIG` at a mounted file:
   `EQUIPMENT_CONFIG=/app/config/my-fleet.yaml`.
5. Confirm via `GET /api/equipment`. New plans snapshot the capacities used.

The loader warns (does not fail) if the declared volume differs from
`L × W × H` by more than 10%; the declared volume remains authoritative.

## Assumptions and limitations

* **No 3D packing.** The planner uses weight and CBM only. It does not place
  boxes/pallets in a 3D grid, check stacking strength, door openings, wheel
  arches, lashing, weight distribution or axle loads, or calculate pallet
  counts.
* **No split of a physical unit.** With `allow_split=true`, a line's *quantity*
  can be distributed across units, but one unit's dimensions must fit inside a
  unit of the chosen equipment.
* **Non-stackable cargo** is flagged as floor-loaded and reported in warnings.
  Because 3D stacking is out of scope, the flag does not reduce the usable
  volume automatically.
* **Road legal limits** (gross weight, axles, 40 t EU limit, 44 t UK, etc.) are
  not checked. The payload values are planning assumptions, not legal advice.
* **Reefers** are not checked for temperature, power, airflow or pre-cooling
  requirements, and are excluded from Auto mode so they are only selected
  deliberately.
* **Dangerous goods, IMO segregation, VGM/SOLAS, customs and security** are out
  of scope.
* One vessel/vehicle type per plan when a fixed type is chosen; Auto may return
  a mixed fleet of the types in the selected category.

## Source list

1. FreightUtils — 20ft standard: <https://www.freightutils.com/containers/20ft-standard>
2. FreightUtils — 40ft standard: <https://www.freightutils.com/containers/40ft-standard>
3. FreightUtils — 40ft high cube: <https://www.freightutils.com/containers/40ft-high-cube>
4. FreightUtils — 20ft reefer: <https://www.freightutils.com/containers/20ft-reefer>
5. FreightUtils — 40ft reefer: <https://www.freightutils.com/containers/40ft-reefer>
6. PIL — Cargo solutions / container specs: <https://pilship.online/shipping-solutions/cargo-solutions/>
7. Mariana Express Lines — dry cargo: <https://www.mellship.com/shipping-solutions/cargo-solutions/?tab=dry-cargo>
8. MOL Logistics — container dimensions: <https://mol-logistics.eu/de/container-dimensions/>
9. Maersk — dry cargo equipment flyer (PDF): <https://beta.maersk.com/~/media_sc9/maersk/local-information/files/europe/greece/export/equipment-flyer.pdf>
10. OOCL — high cube specifications: <https://www.oocl.com/eng/ourservices/containers/containerspecifications/Pages/highcube.aspx>
11. DSV — high cube dry containers (40/45): <https://www.dsv.com/en-za/our-solutions/modes-of-transport/sea-freight/shipping-container-dimensions/high-cube-dry-container>
12. SEACO — 45ft high cube: <https://seacoglobal.co.za/equipment/dry-freight-containers/high-cube-dry-freight/45ft-high-cube-dry-freight-container/>
13. SeaCube — 20ft reefer: <https://seacubecontainers.com/product_specs/20-foot-reefer/>
14. DSV — reefer container dimensions: <https://www.dsv.com/en-ae/our-solutions/modes-of-transport/sea-freight/shipping-container-dimensions/reefer-container>
15. Rohlig — reefer containers: <https://www.rohlig.co.za/resource-centre/documents/reefer-containers>
16. Maersk — reefer equipment specifications (PDF): <https://beta.maersk.com.cn/~/media_sc9/maersk/local-information/files/africa/south-africa/important-information/container-type-and-sizes/reefer-equipment-specifications-updated.pdf>
17. DHL — weight, dimensions and payload calculation (PDF): <https://www.dhl.com/content/dam/dhl/local/no/dhl-freight/documents/pdf/no-freight-payload-calculation-en.pdf>
18. LoadOptima — tonnes and cubic metres a truck can carry: <https://loadoptima.com/en/blog/how-many-tonnes-cubic-metres-truck-capacity>
19. LoadOptima — mega vs jumbo vs standard trailer: <https://loadoptima.com/en/blog/mega-vs-jumbo-vs-standard-trailer-difference>
20. Honexpres — 7.5 t truck: <https://www.honexpres.ro/en/resources/vehicles/camion-7-5t>
21. FreightPod — 7.5 t rigid truck: <https://www.freightpod.co.uk/services/transport/>
22. Kögel — Mega trailer: <https://www.koegel.com/en/product-overview/product-family-tarpaulin-vehicles/product-detail-mega/>
23. Mainfreight — fleet specifications: <https://www.mainfreight.com/en-nl/info-point/transport/fleet-specifications>
